Dogs Photography Session

After a long but delightful lunch with Payton’s rents it was finally my turn to meet Puglets very talented human, Amanda for my 1000 Pugs photo shoot. She truly is a kindred soul. I saw that the second she greeted me so in reply I gave her one of my palm-kisses reserved for my very favorite people.

During the Kickstarter phase, mum had purchased a very special package for me and for her too, I guess. Rather than the 15 minute sitting most other Pugs were getting, this package gave us 3 whole hours in a combination photo shoot and photography lesson. Mum wanted to make sure I had enough time to get comfortable with my surroundings and with a different person photographing me, and she knew there was no way 15 minutes would be enough.

Oh, and she knew that taking a photography lesson from Amanda would be a once in a lifetime experience she just could’nt turn down.

How this worked was we all go find a backdrop that would show off my cuteness and then the humans would sit and talk about photography and dogs while decide if the location was acceptable. As soon as I gave the nod (or even if i didn’t) they d both start clicking away, asking me to look here, look there, tilt my head just so and work the camera.

And work it I did.

In planters…..

photo shoot samples-3

If you look at the bottom right of the picture, you’ll see mums foot. That was the ONLY way I was getting in that planter.

on stairs, on super scary decks
photo shoot samples-1

and in somewhat dirty stairwells.
photo shoot samples-2A lot of the locations were way out of my comfort zone , but Amanda went slow and gave me lots of treats to reward me for giving it the old college try. She pushed me more than mum ever would, but never more than I could handle.

Just when I started to feel a little tired and ragged, I got the best surprise that gave me the energy to really shine.

Continue Reading

Easter, family gatherings and sad times

Sabrina Pugtails easterI hope you all had a good Easter, or Passover, or at least a good weekend.

Things have been a bit ….. strained here.

Due to a family emergency, a bunch of mum’s family were in town all week. Normally visiting family would be a good thing and would mean more attention for me.

Not this time. I don’t know what the emergency was, but mum didn’t go to work all week. Instead she spent lots of time with Auntie C, was gone all day, and even past my dinner time. She would come home to get The Will and then go out again. When she did come home, she would smell like strange people and cleaning solutions.

And she did come home she was sad. Real sad. Like staring at the computer screen not doing anything for an hour or more, or go straight to bed sad. There were no Puggy songs sung or bedtime Puggy stories told.

Don’t worry, I didn’t hold a grudge for being ignored. Much.

I did get to meet some of the out-of-town family. It seems that Poppy and I were not the only 4-leggers being ignored so there were a couple of group walks at the dog park with the visitors, Auntie C and her dogs, the grandparents’ dog and even Auntie A’s little boy – Little C.

I guess little boys benefit from running around the dog park almost as much as Poppy does.

Normally small children scare the bejeebus out of me. Surprisingly Little C isn’t so bad. He and Poppy are likely two peas in a pod – they both have way more energy than their little bodies should be able to contain, and they are both good snuggle buddies after they have been tired out some. And they are both really very sweet.

The visiting family all went home today and mum has returned to work. I think this means that our lives will back to normal pretty quick. I don’t know about any of you, but I really like consistency in my life. I like being fed at the same time every day and I really prefer for my humans to come and go at the same time every day. A girl can only hold it so long, if you get my drift.

One thing I will be talking to mum about is Little C. I like the little guy and would love to have him around more regularly. Oh, and he keeps Poppy entertained. An entertained Poppy means she isn’t hanging off my jowls or nipping on my heels. And that makes me very happy.Sabrina Pugtails

Continue Reading

How to Make Your Very Own Cooling Vest

Yeah it’s cool to make things DIY.. customize.

the most famous create dog vest by yourself is on instructable

 

but if you dare enough to make it on your own here the list of choices top rated Dog Cooling Vest under $100

Swamp Coolerâ„¢
The Ruffwear Swamp Cooler uses natural evaporative cooling to keep your dog cool. Soak it in cold water, wring it out, and fasten around your dog. Evaporative cooling exchanges the dog’s heat as water evaporates from the coat’s reservoir. Temperatures drop through the phase transition of liquid water to water vapor, mimicking the cooling effect of humans’ sweat.

The Swamp Cooler’s light color is designed to reflect heat from the sun. Combined with the evaporative cooling effect, the Swamp Cooler will keep dogs comfortable and ready to run that extra mile. Auto-lock buckles on each side of the jacket provide easy on/off.

 

And heres the original from Sabrina:

OK, here goes. This is my first attempt at writing a sewing tutorial. I really hope I am able to clearly describe how to make your very own cooling vest.

First step, go to the Frogg Toggs site and order yourself Chilly Pad (or two).

The design of the vest is based on a slightly modified version of a very popular brand of harness. Here is a picture of Sabrina modeling hers.The primary modification I made was to widen the chest piece to cover as much of her chest as possible.

Materials I used:
1 meter of 9mm nylon strap
1.5 meter of 10mm knit pre-folded binding
1 Frogg Togg Chilly Pad towel
hardware at my fabric store did not carry the hardware I needed and suggested I purchase an adjustable collar at the local dollar store.

The strap

Collar from the dollar store. $2.00 buys you all the hardware you need and a spare leash

DSC_0126

Hardware from collar

Sabrina Pugtails' cooling vest pattern
Sabrina Pugtails’ cooling vest pattern

Here is the pattern piece – print it out on legal size paper for true to size. This piece will be placed on the fold. Here is what it looks like all spread out. (Don’t forget you can biggify all pictures for more detail)

The main measurements you need to worry about are the neck measurement (the top U of the pattern), across the chest and the measurement from the neck, down the chest and just behind the armpits. It’s always advisable to make a quick mock-up in muslin or another cheap fabric and make alterations from there.

One you are happy with the measurements, trace the pattern onto your Chilly Pad and cut out. I had enough room to make two pattern pieces …. but Sabrina is quite petite (14 pounds).

The only seam on the pattern is the top edges of the U – they will be sewn together to form the neck hole.

Sew binding to all edges except for the seam. This will add to the harness’ structure.

 

Own cooling vest

Sew binding to edges.

When you get to the tight curves around the bottom points, pin binding in place before sewing.

Sew the first strap on a bottom point.  The straps are attached on the right side of the fabric. I used 4″ for this. The trick is to bury the raw edges. I placed the strap flat against the fabric, 1″ from the edge, sewed across the edge to tack it, threaded the clasp, brought the strap down and folded the end under to meet up with the tacked edge. I then sewed (through all layers) down one side, across the bottom, up the other side and across the top – about 1/4″ to 1/3″ from the clasp, creating a box. Make sure the top of the box secures one edge of the strap and the bottom of the box secures the other. Sew a cross in the middle of the box for strength. Do this two or three times for added security.

DSC_0131

4″ of strap with female end of clasp

The next strap is adjustable. Measure your dog around the belly, just behind the armpits. Add a good 5″ to 8″ on that for your second strap measurement.

DSC_0132

Second strap with male end of clasp and slider threaded on

Fold one end up 1/2″ and sew across the bottom. Thread that end through the centre bar of the slider. Fold the end over attach it about 1″ down. Sew across all layers several times for stability.  See above diagram to thread the rest of it.

Fold the second edge up 1/2″ and sew across the bottom. Place the second strap on the second bottom point – about 1″ in from the edge (raw edge down). Secure by sewing across the bottom, up one edge – about 3/4″ up, across and back down forming a box. Sew an X in the box and repeat two more times to fully secure strap.

Match neck seams but don’t overlap. Tack with a wide zig-zag stitch. The  strap on the neckline should be long enough so that the belly strap can be threaded through it and lay straight across the dog’s back.  Sabrina’s measures 4.5″ long. Add 1/2″ to that measurement.

On the “wrong” side, tack strap end to the bottom edge of the seam so that the strap is facing outwards. Thread D-ring through and fold back allowing for the back strap (see above). Pin in place so the fabric seam lays along the middle of the strap. This placement is VERY important. Sew down one edge of the strap, across the edge (in line with the fabric) and up the second side.

Fold strap over the top edge of the fabric, and lay it across the right side of the neck seam, matching it with the strap on the underside. Attached the strap by sewing down each side and along the edges at top and bottom of fabric. Do this 2 or 3 (or 5) times to fully secure strap.

Cut strap so that it is the same length as the finished strap on the underside. Fold edge under 1/2″ and sew across fold several times. You now have 3 layers of strapping – 2 from the underside (bottom and middle straps)  and 1 from the top-side. By hand whip-stitch the top strap to the middle strap along the side edges to hide the raw edge. The belly band is threaded between the bottom and middle straps.

You (and your dog) are now the proud owner of a cooling vest. Soak it in cool water, wring it out and venture forth!

 

Finished cooling vest all ready to go

Things I learned / would do different:

The Chilly Pad is very stiff when it is dry. It is quite pliable when it is wet. When sewing the neck seams and the straps onto the neck, I would wet it down. Otherwise the small neck opening combined with the stiff fabric WILL make you a bit twitchy.

9mm strapping is just a touch too narrow. A slightly wider strap would have sat much better. 12  to 15mm would have been a nicer width.

The fabric store I visited did not have a great colour selection for the strapping, in the width I wanted. I purchased a length of ribbon and sewed it to the strapping to make the pattern I wanted.

If you end up buying the collar and leash combo from the dollar store for the hardware, you may want just use the leash as your strapping. You know it will be wide enough for the hardware and you will most likely be able to find nicer colours/patterns than what the  fabric store sells (unless your store is way more awesome than mine).

 

 

Continue Reading